cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
368
Views
0
Helpful
2
Replies

Cisco changed the address on its own

sapigaroman
Level 1
Level 1

Cisco IE3300-8T2S with IOS XE17.6.3 changed the IP. I don't do it. This stopped production due to an address conflict

 

 

2 Replies 2

Enes Simnica
Level 5
Level 5

hello @sapigaroman based on the entry:  *Jul 30 05:37:33.690: %SYS-5-CONFIG_I: Configured from console by vty0 . This clearly shows the IP change (or config change) was made via remote access (vty0),  meaning someone logged in and changed it manually. U may want to check who owns those IPs or restrict VTY access using ACLs.

check these and let me know how it is going: https://pingmynetwork.com/academy/ccna-200-301/syslog-cisco/

https://support.huawei.com/enterprise/en/doc/EDOC1100276721/37499148/configuring-acl-based-login-control-for-the-vty-user-interface-of-aps 

 

-Enes

 

more Cisco?!
more Gym?!



If this post solved your problem, kindly mark it as Accepted Solution. Much appreciated!

balaji.bandi
Hall of Fame
Hall of Fame

Do you have any Audit in Place, so you can audit and check who changed it.

also check if you have backup then change back to the original IP - based on the backup

check how to secure :

https://www.cisco.com/c/en/us/support/docs/ip/access-lists/13608-21.html

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help