cisco dna interface configuration with maglev

[naresh1986]

Can anyone describe how to configure interfaces (mgmt, enterprise, cluster) with maglev commands or web gui. 

im looking to modify existing default gateway and static routes configuration on interfaces. 

version is 2.2.3.3

Thanks

[Preston Chilcote]

https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and-management/dna-center/2-2-3/install_guide/2ndgen/b_cisco_dna_center_install_guide_2_2_3_2ndGen/m_troubleshoot_deployment_2_2_3_2ndgen.html?#task_c3x_ycw_sfb

Step 4

Enter the following command to access the Configuration wizard. sudo maglev-config update

[Tomas de Leon]

Just a side note,

It is best practice to make CLI changes like this from a KVM session on the Cisco IMC of the Cisco DNA Center.  Modifying Static Routes and Default Gateways from SSH could be dangerous in the event you make a mistake and save the changes.

Performing changes via the Cisco IMC KVM, can circumvent an human errors which would prevent connectivity issues to the Cisco DNA Center.