Hi, I need to edit this ACL DNAC_ACL_WEBAUTH_REDIRECT created automatic by the DNAC Server. How can i edit this? At my controller side or at the DNAC?
Forum Posts
Resolved! Not able to edit switch configuration
I feel this is a fundamental question, but i need to ask as a newbie here. I have been trying to figure out how to edit a switch configuration once it has been discovered and onboarded into DNA Center. Command Runner won't let me use any command to...
Hello, will there be an increase in the maximal amount of device credentials in the future? Cisco did not do anything after publishing this: increase maximum credential count 10 -> 200 CSCwh60626 Regards, Daniel
I have a Cisco Catalyst Center in my DMZ. The Enterprise and Management Ports are all connected and allowed through my internal FW. The Cloud Port is connected to my external FW. Can I use NAT on the external FW to the Cloud Port on the Catalysts Cen...
Resolved! queue size is always 0 on sh interface
Hello All, I am using cisco c9200 catalyst, I have traffic in this router 20000 frame/second and my bandwidth can handle 12500 frame/second my frames are 1000bytes, I am seeing almost 0.1s for end-to-end delay and 37.5% as loss. i expect to see chang...
Resolved! Cisco DNAC Disaster Recovery
I have 2 Cisco DNAC Appliance that I went to deploy it in Disaster Recovery Mode.In my use case, I don't have all Prerequisite as below :I only have 2 sites, the questions where I have to install the witness VM ?I don't have 1 G between the 2 sites....
Hi,I am trying to bulk import devices from a csv file with site name that contains a comma.I have tried to enclose the site name in both single and double quotes, but dnac still complains, and splits the site name into site and RF-Profile. What is th...
Hi, I would like to check if the following is supported by Catalyst Center, 1. Be a NetFlow Server? 2. Integrate NetFlow solution like Solarwinds NetFlow (NTA) or Stealthwatch solution? 3. If item 2 is possible, what can be done once integrated? Only...
I've been trying to get the initial installation completed for Cisco DNA. I have been finding an inconsistency in documentation official and unofficial. Currently I'm in the process of running through the Maglev Configuration Wizard and am having is...
I was trying to lab up a SDA and SDWAN integration. I have SDWAN setup in my Eve-NG and it's connected to dcloud SDA lab through Fusion router DMVPN. I have advertised routes in BGP accordingly and vManage is able to ping DNAC. But when I am trying t...
Hello,I've Catalyst Center Appliance version 2.3.5.5The organization does not utilize it's own PKI Certificate Authority. The CA is an external entity, well known for providing PKI certficate services. And so I have generated a CSR, submitted it and ...
Hi guys I want to use the assurance in DNA Center particularly the Client 360, do I need to have a DNA Advantage or the DNA Essential will do? In the data sheet it is stated it should be DNA Advantage but some says Essential is enough to see the Clie...
Resolved! Catalyst Center Disaster 1+1+1
Hello, I have a question regarding the Catalyst Center Disaster 1+1+1 design (1 Catalyst Center in the main site, 1 Catalyst Center in the recovery site and 1 Witness VM). We can have L2 between the 2 x Datacenters. I understand for a 3+3+1 design, w...
We currently have DNA Spaces for location services integrated with Cisco Prime and a 5520 WLC. We are replacing access points that will be on a Cisco 9800 that's integrated with DNAC. We have the location hierarchy defined in DNAC. As we convert a ...
Hi all,Would like to seek your thoughts on how to check the coverage for the 3850 and 9300 series switches.I know we have the site to check https://cway.cisco.com/sncheck/, but when I entered the Serial Number, it didn't show any detailed coverage in...
