Ucs Powertools security protocol is not supported

[enrico.corvino]

I'm trying to start using Ucs power tool (on linux), so I've installed these modules:

ModuleType Version Name
---------- ------- ----
Binary 2.5.3.0 Cisco.UCS.Core
Binary 2.5.3.0 Cisco.UCSManager

Unfortunately each time I try to connect to ucs manager I get this error:

Connect-Ucs : The requested security protocol is not supported.
At line:1 char:1
+ Connect-Ucs ucsmini1
+ ~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Connect-Ucs], NotSupportedException
+ FullyQualifiedErrorId : Cisco.Ucsm.Cmdlets.ConnectUcs

I've read that on linux ucs-powertools are based on core version and needs powertools version 2.3.1.5 , so I've removed 2.5.3 and installed 2.3.1.5 but still get same error.

Anybody have already solved this?

PS:sorry for wrong label but system keeps giving me error "The following labels are not available here: UCS IntegrationUCS PowerTool"

[enrico.corvino · Accepted solution]

I solved following this guide:

https://community.cisco.com/t5/cisco-developed-ucs-integrations/cisco-ucs-powertool-core-suite-for-powershell-core-modules-for/ta-p/3643354