Hello,I want to configure loss measurement(Y1731) in CSR1000v. according to its manual Class of Service(CoS)-level monitoring must be enabled on MEPs associated to the Ethernet frame loss operation by using the monitor loss counter command on the dev...
Forum Posts
Hi, my boss ask me to give him official document (datasheet) (information) about temperature threshold on c6509-E, i mean that this thresholds are hardened recorded to ios, as i think?! I can't find this information, HELP, please?! our ios
In some of Cisco IOS-XR series you can find the model/type in "show version" command. For example - show versionMon Feb 24 10:07:37.834 UTCCisco IOS XR Software, Version 4.3.2[Default]Copyright (c) 2014 by Cisco Systems, Inc.ROM: System Bootstrap, V...
HiDon't know where to put this question, but I need vss stencils for IE 2000 switches. The one I found on https://www.cisco.com/c/en/us/products/visio-stencil-listing.html doesn't work. Anyone who knows where to find a working stencil for this???
Resolved! IOS 12.2(58)SE
I have two catalyst 3750x switches in a stack. They are running 12.2(58)SE. I have a third 3750x I want to add to the stack. It is running running 12.2(55)SE. I tried to download 12.2(58)SE from the CISCO site but it wasn't listed. Only 12.2(55)...
Resolved! FTDv 6.3.0.5 pre-login banner
I have a FTDv not connected to and FMC running 6.3.0.5 software. I have a customer requirement to have a pre-login banner. I've reviewed other forums and have not found anything that can point me in the right direction to configure the banner in the ...
Hi All, Im using ASA 5516-X, and here is my version: ASA 9.8(4)25ASDM 7.12(1)SFR 5.4.1-211Java Version 8 Update 261 Im using Windows 10 PRO and Windows Server 2016 download ASDM and try to access. But there are error "ASDM was unable to load the fir...
Hello community, I don't know it's right place for discuss this problem. Sorry for that. I'll be very grateful if you help me in this case. My task was:1) Upgrade Rommon Image2) Upgrade IOS-XE Image The problem is that when I upgraded Cisco ASR 1004 ...
Hi, I have a C1111-40 Router running 16.10.1b IOS XE. I want to use the "specific license reservation" feature, but i just found a link that says it needs IOS 16.11.1a to work: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/smart-licensing/qsg/b_S...
Hello All, I have to upgrade IOS fo 3850 switches from 03.02.02.SE to Everest 16.6.8. Switch Ports Model SW Version SW Image Mode------ ----- ----- ---------- ---------- ----1 56 WS-C3850-48T 03.02.02.SE cat3k_caa-universalk9 INSTALL2 56 WS-C3850-48T...
Hello, not sure if this would be hardware or software. I am getting what appears to be a timed reboot sequence. I have verified the power supply is not the issue as I have swapped it with another.from my ISP perspective my authentication drops what s...
HiI am researching about certain features on ASR9k. During research I encountered a lot documents which mention this specific feature is supported on Enhanced Ethernet cards.I know that we have some types of cards on ASR9K such as Enhanced Ethernet(2...
Hello community,I am struggling with problem with some CSR1000v for about 2 weeks now and since I think that I nearly tried and read everything I could on the internet, I will try to find some help here now.I just downloaded the CSR1000v software (.i...
Anybody know what is the "IAS" in IOSD-UNIVERSALK9_IAS-M
Good morning A user just started getting this error about the certificate and i cannot see where it is out of date. ANy ideas? It looks like it connects for a second before bouncing back with the attached error. Try logging in again
