Can't connect Movi to VCS in-house

[Jeremy Morris]

I cant seem to get Movi working in-house.  I've got 4.3 (Jabber) loaded on my Dell laptop (Windows 7).  I enter in the IP address of the VCS Control with no luck.  I also use the DNS name of the Control and I get a DNS lookup error.  But when I go to our DNS server, the name is correct.  What am I missing?

Thanks.

Jeremy

[Alok Jaiswal]

Hi Jeremy,

Please check the below link for the port details:

http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Authenticating_Devices_Deployment_Guide_X7-0.pdf

check appendix 5

Thanks

Alok

[Alok Jaiswal]

Hi Jeremy,

Please ignore my previous reply..it was a typo error...

One important thing you didn't tell us is about the deployment scenario for MOVI. You are using provisoning database to authenticate or you are authenticating the MOVI using AD.

Thanks

Alok

[Jeremy Morris]

I did upload the latest XML and created a user with login/password.

[Garvan Long]

Have you specified a SIP server in the Movi provisioning configuration on TMS  ?

[Jeremy Morris]

I spent a couple hours in a WebX with Cisco yesterday and seems there's an issue in the VCS regarding the TMS Agent replication...