08-24-2011 11:17 AM - edited 03-17-2019 02:10 PM
Is it possible to connect CISCO Jabber to CME 8.6
10x in advanced
08-26-2011 08:51 PM
Hello
Hoping you are doing well.
Firstly thank you fo contacting Cisco Support Community. Below is a brief sumamry on the query:
The Cisco Jabber for Android is designed in order to work with Cisco Call manager and Cisco Unity Connection.
CIsco Jabber for Andoid includes following limitations and restrictions. Below is the resource link:
As per the above link:
Telephone integration with call manager versions 6.1.5, 7.1.5, 8.0.3, 8.5, and 8.6 ONLY
Hope the above was informative. Please let me know if you have any further queries and we will be more than happy in assisting further on the same.
Thanks and Regards
Prashanthi Velpula
04-02-2013 01:07 AM
CME is supported for Cisco Jabber
voice service voip
ip address trusted list
ipv4 192.168.50.5 255.255.255.255
allow-connections sip to sip
sip
bind control source-interface GigabitEthernet0/1
bind media source-interface GigabitEthernet0/1
registrar server
voice register global
mode cme
source-address 192.168.9.5 port 5060
max-dn 8
max-pool 8
authenticate register
authenticate realm firewallcx
tftp-path flash:
file text
create profile sync 0033775744721428
voice register dn 5
number 778
name Chris-Android 778
label Chris-Android 778
!
voice register pool 1
registration-timer max 720 min 660
id mac 147D.C5AF.79B2
session-transport tcp
type Jabber-Android
number 1 dn 5
username chris password firewallcx
codec g729r8
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: