Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Store and Forward fax T.37 over SIP trunk on CME 8.6My company utilize CME 8.6 with SCCP phones , 4 analog POTS line true FXO/DID ports . CME is configured for UM on Exchange 2010 for voice mailboxes and store and forward fax messages with IVR ON-RAM...
We have SIP trunk with CME 8.6 and 10 SCCP (7960,7975) phones, also UM with Exchange 2010 , everything work perfectly until we added two SIP client phones.SIP client phones 9971 and 7906 have issue with sending DTMF signals.From both SIP phones I can...
Any idea where I can download TCL script app-faxmail-onramplink posted on docs "Configuring T.37 Store-and-Forward Fax"seems to be dead, folowing link in docs goes to the download navigatorhere is the linkhttp://www.cisco.com/pcgi-bin/tablebuild.pl/t...
I add ATA-186 SCCP to CME 8.6 infrastrukture, I can make calls and receive them but audio goes only in one direction from CME to ATA-186 . I try different calls from ATA-186 to another SCCP extension , SIP extension , SIP trunk , PSTN line same probl...
Something thing wrong in my case All Phones could not register with error Aug 10 14:38:35.627: ephone-(4) Allow any Skinny Server IP address 192.168.x.xxx SEPxxxxxxxx: Registration failed. Max phone count reached if I issue Show Version command I se...
Does anyone know some SIP Fax server software with T.37 supportPaolo can you give some examples for T.37 on the PSTN gateway I am not sure what I need to do.10x in advanced.
May by odl post but I have similar problem We have SIP trunk with CME 8.6 and 10 SCCP (7960,7975) phones, also UM with Exchange 2010 , everything work perfectly until we added two SIP client phones.SIP client phones 9971 and 7906 have issue with send...
