12-30-2014 04:33 AM - last edited on 03-25-2019 08:53 PM by ciscomoderator
Dear Experts;
I am new to Cisco VCS and TP and till date I have installed and configured VCS-C,VCS-E,TMS,TCS and MCU.
Now in our BOM there is 10 licenses for Jabber MoVi video clients For that i have installed TMSPE 1.2 in TMS 14.4.2 server.
I have no idea how to move after that.
If Jabber will register with VCS-C or VCS-E(Public IP nated)... I think jabber can register in both VCS-C if user inside network and VCS-E if outside network?
Please suggest me some cisco docs so that I can move forward with the jabber and the easiest way for Jabber to register with VCS-C or VCS-E how?
If Jabber can be installed any Android or smart phone ipad etc or not?
Appreciate for some valuable guidance
Regards
Debashis.
Solved! Go to Solution.
01-16-2015 05:11 PM
The Jabber that you are referring to is Jabber Video. Manish was sending a guide that is for Mobile & Remote Access. That particular solution uses Jabber for Windows, Android, iPhone, iPad, and MAC.
With Jabber Video, essentially you provision these clients with TMSPE/TMS and they will register to VCS
This guide here is probably a good place to start.
-P
12-31-2014 02:18 AM
Hi Deb,
Please check the MRA via VCS deployment guide below for all the details
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-1/Mobile-Remote-Access-via-VCS-Deployment-Guide-X8-1-1.pdf
HTH
Manish
01-16-2015 05:11 PM
The Jabber that you are referring to is Jabber Video. Manish was sending a guide that is for Mobile & Remote Access. That particular solution uses Jabber for Windows, Android, iPhone, iPad, and MAC.
With Jabber Video, essentially you provision these clients with TMSPE/TMS and they will register to VCS
This guide here is probably a good place to start.
-P
01-20-2015 11:24 PM
Thanks Paul.
That's great what I was looking thanks.
Regards
Debashis
01-16-2015 05:31 PM
Yes Jabber can be installed on smatphones. Go the through the below deployment guide, it should cover most of the stuff:
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-5/Mobile-Remote-Access-via-Expressway-Deployment-Guide-X8-5.pdf
-Terry
EDIT: Apologies for the duplicate post, by some reason didnt notice the below posts have covered the query
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: