12-30-2014
04:33 AM
- last edited on
03-25-2019
08:53 PM
by
ciscomoderator
Dear Experts;
I am new to Cisco VCS and TP and till date I have installed and configured VCS-C,VCS-E,TMS,TCS and MCU.
Now in our BOM there is 10 licenses for Jabber MoVi video clients For that i have installed TMSPE 1.2 in TMS 14.4.2 server.
I have no idea how to move after that.
If Jabber will register with VCS-C or VCS-E(Public IP nated)... I think jabber can register in both VCS-C if user inside network and VCS-E if outside network?
Please suggest me some cisco docs so that I can move forward with the jabber and the easiest way for Jabber to register with VCS-C or VCS-E how?
If Jabber can be installed any Android or smart phone ipad etc or not?
Appreciate for some valuable guidance
Regards
Debashis.
Solved! Go to Solution.
01-16-2015 05:11 PM
The Jabber that you are referring to is Jabber Video. Manish was sending a guide that is for Mobile & Remote Access. That particular solution uses Jabber for Windows, Android, iPhone, iPad, and MAC.
With Jabber Video, essentially you provision these clients with TMSPE/TMS and they will register to VCS
This guide here is probably a good place to start.
-P
12-31-2014 02:18 AM
Hi Deb,
Please check the MRA via VCS deployment guide below for all the details
http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-1/Mobile-Remote-Access-via-VCS-Deployment-Guide-X8-1-1.pdf
HTH
Manish
01-16-2015 05:11 PM
The Jabber that you are referring to is Jabber Video. Manish was sending a guide that is for Mobile & Remote Access. That particular solution uses Jabber for Windows, Android, iPhone, iPad, and MAC.
With Jabber Video, essentially you provision these clients with TMSPE/TMS and they will register to VCS
This guide here is probably a good place to start.
-P
01-20-2015 11:24 PM
Thanks Paul.
That's great what I was looking thanks.
Regards
Debashis
01-16-2015 05:31 PM
Yes Jabber can be installed on smatphones. Go the through the below deployment guide, it should cover most of the stuff:
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-5/Mobile-Remote-Access-via-Expressway-Deployment-Guide-X8-5.pdf
-Terry
EDIT: Apologies for the duplicate post, by some reason didnt notice the below posts have covered the query
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide