06-11-2013 06:22 AM - edited 03-17-2019 03:18 PM
Hi group,
I meet an issue with Jabber and CUC. When a failover is done on my primary voicemail server, Jabber is not able to connect to secondary server.
Here is the profile used:
Furthermore when primary CUC server come back, Jabber is no more able to connect to this one. I need to log out and log in again.
Have you already this issue?
Here are versions used:
- Jabber release 9.2(1)
- CUCM 9.1.1.10000-11
- CUC 9.1.1.10000-32
Regards,
Samuel
Solved! Go to Solution.
06-11-2013 09:34 AM
Hi Samuel,
I would say you're hitting this bug http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCud63427
Unfortunately as of now there's no fix but it'll come out on a later release.
Please remember to rate helpful responses.
06-11-2013 09:34 AM
Hi Samuel,
I would say you're hitting this bug http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCud63427
Unfortunately as of now there's no fix but it'll come out on a later release.
Please remember to rate helpful responses.
06-11-2013 11:42 AM
Thanks Joshua!
06-04-2014 11:58 PM
Hi I now have jabber 9.7
Unity Connection 10
CUCM 10
Is this bug still valid?
11-10-2015 11:02 PM
Could be that I hit also this bug. Jabber didn't connect to second voicemail server, when primary is down.
My Versions:
Jabber version: 11.1.1 Build 22531 and Jabber 11.1(0)
CUCM version: 10.5.2.12901-1
CUC version: 10.5.2.12901-1
Will open a TAC case and look what he tell me about that.
best regards
Ben
11-12-2015 06:45 AM
Hi,
I'm too having the same issue with jabber 11.1.1. Anyone having any solution?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: