12-05-2019 02:25 PM
I just used to PUT tool to get the install media for CUCM 12.5 and PCD 12.6. The issue I am having is that the software download I got has a Bootable ISO for PCD however all the documentation says I should get an OVA that has the install media packaged inside. Am I missing something? I cannot find an OVA for this anywhere.
Solved! Go to Solution.
12-05-2019 02:58 PM
You can just deploy the CUCM OVA with the right specs and use the ISO
12-05-2019 02:58 PM
You can just deploy the CUCM OVA with the right specs and use the ISO
12-06-2019 05:45 AM
Are you trying to install PCD or CUCM?
If PCD you should just be able to deploy the ova and when powered on the install should run.
12-06-2019 06:40 AM
02-20-2020 05:58 AM - edited 02-20-2020 05:59 AM
So unless you are installing on the BE6K then there is not a configuration within the CUCM OVA for PCD 2vCPU, 4GB RAM and 80GB Disk
https://www.cisco.com/web/software/283088407/145119/cucm.ova.README.pdf
Do you know if the BE6K configuration will be available to select when installing on non BE6K platforms?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide