05-27-2018 01:36 AM - edited 03-17-2019 07:33 PM
Dear Experts
I would like to know can we integrate cisco webex application with our existing CUCM/MX200 Telepresence for Video conference meetings ?
kindly let me know what do i need for this.
05-27-2018 09:37 AM
Hi there
Yes, you can register MX200with CUCM and the WebEx video support is available for this device.
Below is the matrix guide
https://collaborationhelp.cisco.com/article/en-ca/DOC-6428
Hope this helps
Cheers
Rath!
***Please rate helpful posts***
05-27-2018 04:26 PM
Thanks for your reply, could you please let me know what do we need to use this video meeting service with Cisco webex ?
Just purcashing Cisco webex for end user enough ? Or do we need some type of servers or CRM ?
thanks
05-27-2018 07:27 PM
05-27-2018 11:31 PM
05-28-2018 07:49 AM
Hi there
I think you are good to go with Cloud WebEx.
Below are the WebEx plans
https://www.webex.com/wx11/index.html
Hope this helps
Cheers
Rath!
*Please rate helpful posts***
05-29-2018 07:23 PM
You would simply build the necessary routing to place the call to Webex at minimum. Since you have Expressway it is essentially a B2B call just without the license charge. Then you schedule meetings in Webex or use a PMR and you can join it like any bridge call.
If the endpoint supports scheduling with the TMS application you may want that for on premise support of scheduling.
What you’d be essentially purchasing, if you’re referring to the Webex Meetings service, is a fancy video bridge.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide