jabber application dial rules

[balitewiczp]

When changing the application dial rules in cucm, do I need to restart the tftp server , or are the changes updated immediately?

thanks

[Nagajothi Thangapandian]

Hi

With 8.6 and earlier version of CUCM, the cop file should be installed everytime whenever there is a change in dial rule and then TFTP restart. Any later version will required just tftp restart along with jabber logout and login.

Regards

[balitewiczp]

Thanks for the quick response.  Can you elaborate more on where this .cop file is, and is it service impacting to the jabber clients?

[balitewiczp]

is it the cmterm-cupc-dialrule-wizard-0.1.cop.sgn ?

[Nagajothi Thangapandian]

yes it is cmterm-cupc-dialrule-wizard-0.1.cop.sgn. If you can download CiscoJabber-Admin-ffr.10-x-x from cco and unzip there you can get this file. There will not be any service impact. Once after the installation TFTP restart is required.