06-27-2016 03:23 AM - edited 03-17-2019 06:12 PM
Dear all,
I'm trying to send jabber client URL configuration to change the service domain for service discovery (e.g. ciscojabber://provision?ServicesDomain=example.com&VoiceServicesDomain=uc.example.com) via mail but unfortunately the URL doesn't appear as a hyperlink; It just appears as a clear text.
I need the advice for solving this issue.
Regards;
Omar Gamil
06-28-2016 02:10 AM
Hi Omar,
You can use the following procedure:
Use the following procedure to distribute the link from a website.
Procedure
07-25-2016 08:12 AM
Hi Manish,
I tried this workaround but unfortunately it didn't work as well. so, is there any other method to solve this issue.
Thanks in advance
07-25-2016 08:48 AM
its strange. i checked the install guide for jabber 11.6 but it was not mentioned if this method is supported for jabber for windows. can you try the URL which you created on MAC or mobile. The guide which i am referring is below :
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_6/cjab_b_on-premises-deployment-ciscojabber-116/cjab_b_on-premises-deployment-ciscojabber-116_chapter_01110.html
07-25-2016 01:11 PM
I don't face any issue in the windows client as I Installed the client via cmd as mentioned in the document. The problem is in the link for mobile device for android as the device doesn't recognize it as a link, it consider the link as a clear text. I tried the method of putting the link in a web page and it didn't work as well.
Is there any method overcome this issue?
Thanks in advance
07-26-2016 02:28 AM
can you try adding http: in front of the link and then check if this works for example
http://ciscojabber://provision?ServicesDomain=example.com&VoiceServicesDomain=uc.example.com
07-26-2016 03:17 AM
Hi Varundeep,
I tried this and didn't work.
07-26-2016 04:15 AM
alright then try this and this should work.
1. configure the URL in HTML link. for eg
<!DOCTYPE html>
<html>
<head>
<title>Hyperlink Example</title>
</head>
<body>
<p>Click below for jabber provisioning</p>
<a href="ciscojabber://provision?servicesdomain=example.com&ServiceDiscoveryExcludeServices=WEBEX" target="_self">Jabber Provisioning</a>
</body>
</html>
and then save this file as HTML.
2. once you do this , host this html file on a web server. make sure jabber is able to access web server and this html file.
this is an ideal sol and should work :)
12-12-2017 10:18 AM
Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide