08-20-2015 06:03 PM - edited 03-17-2019 05:27 PM
CUCM 10.5
Jabber 11.01
I cant seem to get video to work with Jabber in conference call. I can get video between two Jabber clients but when I add the third it will drop the video and continue with just audio. I have tried this using a Meet Me conference with the same result. I have an homogeneous IOS dspfarm configured with the appropriate MRL:
dspfarm profile 5 conference video homogeneous
codec g722-64
codec g729br8
codec g729r8
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
codec h264 w360p frame-rate 30 bitrate 1mbps
maximum conference-participants 8
maximum sessions 2
associate application SCCP
I can see on my router that dsp's are assigned to the audio portion of the call but I dont see any request for the video.
SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED
0 1 32.1.5 UP N/A FREE v-conf 1 - - -
0 7 32.1.5 UP 1 USED a-conf 1 26 854 849
0 7 32.1.5 UP 1 USED a-conf 1 27 205 201
08-21-2015 05:10 PM
We'll I have partly figured out my problem and I'll post just in case any one else has this problem. The above config actually worked but I was testing using a "meet me" conference which was my problem. If I started a "meet me" by pressing the "meet me" button and dialing my "meet me" extension I would get a camera with a line thru it and I couldnt start my video. Any participants that joined would also not be able to start their video. I figured out if I performed the following sequence I could get the video to work:
1. Press "Meet Me"
2. Dial "Meet Me" extension (7000)
3. Put that call on hold.
4. Dial 7000 (I would get video on the second call)
5. Hang up the first call where I started the "Meet Me" conference.
6. All other participants that joined would get video also.
If anyone could explain why and how I can fix this I would appreciate it.
08-25-2015 12:24 AM
I noticed the maximum session you have in the dsp profile is only 2??
maybe you don't have enough resources.
08-23-2015 12:01 AM
Dear,
Do you have a Telepresence Server to handle the video Conference?
because as you know CUCM can handle only one to one video calls.
08-24-2015 12:06 PM
I have a router configured with an homogeneous IOS dspfarm.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide