Jabber for Windows Video Conference

[h.parsons]

CUCM 10.5

Jabber 11.01

I cant seem to get video to work with Jabber in conference call. I can get video between two Jabber clients but when I add the third it will drop the video and continue with just audio. I have tried this using a Meet Me conference with the same result. I have an homogeneous IOS dspfarm configured with the appropriate MRL:

dspfarm profile 5 conference video homogeneous  
 codec g722-64
 codec g729br8
 codec g729r8
 codec g729abr8
 codec g729ar8
 codec g711alaw
 codec g711ulaw
 codec h264 w360p frame-rate 30 bitrate 1mbps
 maximum conference-participants 8
 maximum sessions 2
 associate application SCCP

I can see on my router that dsp's are assigned to the audio portion of the call but I dont see any request for the video.

SLOT DSP VERSION  STATUS CHNL USE   TYPE    RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED

0    1   32.1.5   UP     N/A  FREE  v-conf  1      -         -         -
0    7   32.1.5   UP     1    USED  a-conf  1      26        854       849
0    7   32.1.5   UP     1    USED  a-conf  1      27        205       201

[h.parsons]

We'll I have partly figured out my problem and I'll post just in case any one else has this problem. The above config actually worked but I was testing using a "meet me" conference which was my problem. If I started a "meet me" by pressing the "meet me" button and dialing my "meet me" extension I would get a camera with a line thru it and I couldnt start my video. Any participants that joined would also not be able to start their video. I figured out if I performed the following sequence I could get the video to work:

1. Press "Meet Me"

2. Dial "Meet Me" extension (7000)

3. Put that call on hold.

4. Dial 7000 (I would get video on the second call)

5. Hang up the first call where I started the "Meet Me" conference.

6. All other participants that joined would get video also.

If anyone could explain why and how I can fix this I would appreciate it.

[Laith Ibrahim]

I noticed the maximum session you have in the dsp profile is only 2??

maybe you don't have enough resources.

[Laith Ibrahim]

Dear,

Do you have a Telepresence Server to handle the video Conference?

 because as you know CUCM can handle only one to one video calls.

[h.parsons]

I have a router configured with an homogeneous IOS dspfarm.