cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
364
Views
0
Helpful
1
Replies

Jabber Resetting Preferred Devices

Jeffrey Osborn
Level 1
Level 1

Hello,

We have an organization of roughly 100 users.  Most are using wired headsets but a handful are using wireless.  Two of those using wireless occasionally seem to be on a call when suddenly their microphone and speakers switch from the headset (mid conversation) to their built in speakers/mic.

There seems to be no rhyme or reason for this.  I went in and set their preferred devices to their headsets and they tried again.  Once it happened again, I checked the preferred devices and they had been reset to the built-in speakers/microphone to be the priority.

I have no idea what's going on here.  I can only think that there is something disrupting their signal and that's causing the issue however, this is happening with a third person as well and she works remotely (mostly from home) and experiences the same issue. Any ideas?  Thank you!

1 Accepted Solution

Accepted Solutions

Muaaz El Kamali
Level 1
Level 1

Hi Jeffrey, 

First thing I can think of the compatibility of the headset with Cisco Jabber. 

Secondly I will check that there is no interaction from the users.

Regards, 

Muaaz

View solution in original post

1 Reply 1

Muaaz El Kamali
Level 1
Level 1

Hi Jeffrey, 

First thing I can think of the compatibility of the headset with Cisco Jabber. 

Secondly I will check that there is no interaction from the users.

Regards, 

Muaaz