10-13-2020 07:12 AM
Hi Guys ,
I need help to understand how to achieve the Pause dialing on Cisco Cube . It is a third party integration with the CUCM 11. 6 . Speed dial is out of picture. Here is the scenario
Call Flow--
CUCM-SIP--Cube --SIP--Third party Device
Expectation
User(third party) will dial 16457PPPP*101#(Here P as Pause). User will dial the number 16457 then the call will connect and wait for 4 pause(4 seconds) pause can vary and then user will enter the *101#( This is a DTMF Digits) . CUCM will capture digits and will route the call to Another Third party Device.
Not sure weather this can be done on CUCM or Cube using the VoIP Dial-peer. Please suggest.
10-14-2020 08:19 AM
Any one who has deployed or worked on similar environment.
10-14-2020 09:01 AM
This might get you started with this. https://community.cisco.com/t5/unified-communications/tech-tip-how-to-insert-a-pause-in-the-dialed-number-on-an-h-323/td-p/3584327
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide