Solved: PCD support syslog configuration?

dsobrinho · ‎01-18-2023

Hi guys,

Does anybody knows if PCD support syslog configuration since It does not have serviceability to point the syslog server?

Best regards

Daniel Sobrinho

Nithin Eluvathingal · ‎01-18-2023

Refer below Guides.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/pcdadmin/12_5_1/cucm_b_pcd-admin-guide-1251/cucm_b_pcd-admin-guide-1251_chapter_0101.pdf

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/pcdadmin/12_0_1/cucm_b_pcd-admin-guide-1211/cucm_b_pcd-admin-guide-1211_chapter_011.html#reference_C3B409B0BDD76271155A457D6686BC75

Configure Audit Logs

Use this procedure to configure audit logs for local and remote syslog server through the Cisco Prime Collaboration Deployment application.

Procedure

Step 1

From the Cisco Prime Collaboration Deployment application, click open and close navigation and choose Administration > Audit Log Configuration.

Step 2

Choose one of the options from the Application Audit Event Level drop down list to configure an audit level.

Step 3

Enter the name of remote syslog server or the IP address for the Remote Syslog Server Name / IP field so that the audit logs are logged into this remote server.

Step 4

(Optional) Check or uncheck the Enable Local Audit Log check box to enable or disable the local audit log.

When you check this field, the audit events are logged in the local server. When you uncheck this field, audit events are not logged in the local server. The audit events includes User ID, ClientAddress, Severity, EventType, ResourceAccessed, EventuStatus , AuditCategory, CompulsoryEvent, ComponentID, CorrelationID and Node ID.
When you check this field, the Enable Log Rotation field becomes active.

Step 5

(Optional) Check or uncheck the Enable Log Rotation check box to enable or disable the log rotation.

Note

You can configure this field if Enable Local Audit Log is enabled.

When you check this field, you can configure the Maximum No of Files, Maximum File Size(MB), and Warning Threshold for Approaching Log Rotation Overwrite(%) fields. When you uncheck the Enable Local Audit Log field, the default values of these fields are not applicable as they are inactive.

Step 6

Enter an integer value for the Maximum No of Files field to configure the maximum number of files that can be created on the server.

Step 7

Enter a value for the Maximum File Size (MB) field to configure the maximum file size of each log that is created on the server.

Step 8

Enter the warning threshold value for the Warning Threshold for Approaching Log Rotation Overwrite(%) field.

Step 9

Click Save.

Step 10

(Optional) Click Reset.

The page is reset with the default values.

View solution in original post

Nithin Eluvathingal · ‎01-18-2023