01-17-2020 08:36 PM
Hello
I have configured some SIP TRUNKs and works well. My question is if there is a way where if my wan failure the calls could re route through PSTN?
I was reading AAR but it says that this options is used only when Location CAC isn't sufficent.
Solved! Go to Solution.
01-18-2020 08:21 AM
01-18-2020 02:04 AM
Yes you can do that. For this you would need to add the RG that the PSTN VGW is in as the second option in the RL used and make sure that the called and calling number format is set to what ever your PSTN connection require.
01-18-2020 07:55 AM
Hello
Ok I understand about to add gw to pstn as secound option but what about the digit manipulation in this case?
Because numbers by wan are simple example 1XXX and you should know this are complety different in pstn where the numbers begin with 9
01-18-2020 08:21 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide