Room Device(Roomkit pro) registered with Webex (L-KITPRO-MS)

[soohyung choi]

L-KITPRO-MS (embedded multipoint)

If the roomkit pro registered with webex ,but we can't do multisites conference using L-KITPRO-MS (embedded multipoint license)

Method is unknown. I'd like to know how.

Thank you

Regards,

[Vaijanath Sonvane · Accepted solution]

Hi,

If your endpoint is registered with following call control applications and if you do not have separate MCU resources, then you need embedded MultiSite license to do multi-point ad-hoc video conference.

•  Cisco Unified Communications Manager (CUCM)
• Cisco TelePresence Video Communication Server (VCS)
• Third-party H.323 gatekeepers and standards-based SIP proxies

When you register your endpoint with WebEx Cloud, you do not have option to add other video participants manually. In this case MultiSite license is of no use.

[soohyung choi]

Thanks your help

[Vaijanath Sonvane · Accepted solution]

You are most welcome!

[Ratheesh Kumar]

Hi there 

For webex devices to use conference feature, you have to use the Webex bridge and use the SIP URI or phone number to dial-in. Thats the only option.

Hope this Helps

Cheers
Rath!
***Please rate helpful posts***