05-09-2019 09:21 AM
Spark Board 55 that has previously been working now won't boot. It's offline, no network connectivity lights and power cycle results in a back-lit display with no splash screen or boot process. I've attempted to reset with button on the bottom but no result. Anything else I can do to troubleshoot or reset?
05-09-2019 10:56 AM
If you're sure you have a good power cable and source, there's really nothing else you can do except RMA the unit.
05-09-2019 11:27 AM
That's what I assumed, but wanted to dbl-check.
05-13-2019 09:03 PM
By "Button on the bottom" did you mean the factory reset hole? If so, did you hold the button in for miltiple seconds? (A quick push will not do it).
Are you able to do anything with it? Can you get to the Tech Support Streen (Hold down one finder on the board's screen and press the home button three times)?
Please remember to mark helpful responses and to set your question as answered if appropriate.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide