I have confirmation that the issue should be sorted out by the end of this week. Please let me know if this works for you, else we can get you temporary licenses for the time being.
Does the new feature Caller ID Support only shows the caller number as a overlay on the IP Phone or will it show the caller information as usual calls are displayed? Will it pass now the Caller ID or still CTI Port number through CUCM CTI during the alerting state?
This is the current implmentation:
With the introduction of the CLID feature, we are now able to see the calling number itself when the consult call is ringing on the agent phone. This feature is actually implemented by pushing the data in an additional screen on the agent phone. What this means is that an additional screen pops up on the agent phone which contains the calling number and also the CLID header (if enabled). There is no change in the number passed by CUCM and if the agent hits on the EXIT button, the CTI port number can still be seen in the ringing state. Therefore, there is no change in the way the call information is delivered from a CUCM/CTI perspective. The CLID information is delivered to the agent phone by pushing an additional page to the phone which contains the information:
While we are on this topic, here are the commands that will come in handy:
utils uccx icd clid disable
utils uccx icd clid enable
utils uccx icd clid header
utils uccx icd clid prefix
utils uccx icd clid status
Important points to note:
Do let me know if you need any clarifications.
Thanks for the update. Please could you arrange for temporary licenses as I really need to start the upgrade as soon as possible. I have the mac for the server.
I have subimitted the request and will let you know as soon as I get the license. Please provide your email id so that I can send you the license file.
UCCX 10 .0 CAD / CSD Application supported to windows 8.
UCCX 10.0 CAD/CSD is currently not compatible with Windows 8:
Please note that going forward, the focus will be on Finesse as the agent desktop. This is already introduced in this version of UCCX and it is a browser based agent desktop and this removes the dependency on the OS version of the PC.
I currently run UCCE 8.5 with CUCM 8.5.1 infrastructure. I want to run a mini helpdesk on UCCX, can I still integrate CCX 10 with the CallManager?
I would answer this in parts:
Can you integrate both UCCX to a CUCM cluster already integrated with UCCE?
Yes, you can do this since the UCCX will use AXL and CTI services of the CUCM; and the application users through which the service is rendered are completely independent. Eg: the CTI user for UCCX and that for UCCE will be different and the CUCM will be able to service both the products. The only things you need to keep in mind are to ensure that numbers are not shared for both products: a DN being a route point for both UCCE and UCCX. And ensure that your CUCM cluster is sized correctly to handle this increased number of devices (read CTI devices, AXL requests etc.)
Can you integrate the UCCX 10 with your current CUCM system?
This will not be possible becasue UCCX 10 is not compatible with CUCM 8.5, so you will have to use a higher version of CUCM.
The compatiblity of CUCM with UCCX 10.0 can be checked in the compatibility matrix:
Hope that helps!
Hi Abhiram, can you explain UCCX10 wallboard reporting and licensing requirements?
Many thanks, Ash.