03-04-2008 12:32 PM - edited 03-14-2019 01:55 AM
I am using UCCX and I wonder if I can create a script that will automatically divert the CRS to another number (other branch of our office) in case the whole call center is out-of-service. Please advise, thanks.
Solved! Go to Solution.
03-04-2008 11:31 PM
Hi there,
if the outage is down to a failure on the IPCCX I hardly see your script going to be able to work, in that case I would set the Forward on No answer on the UCM side for the CTI Route Point that handles incoming IPCCX calls.
If the issue is down to problems with the location, you could sure implement an emergency script redirecting all calls to a different number.
Regards,
Riccardo
03-04-2008 11:31 PM
Hi there,
if the outage is down to a failure on the IPCCX I hardly see your script going to be able to work, in that case I would set the Forward on No answer on the UCM side for the CTI Route Point that handles incoming IPCCX calls.
If the issue is down to problems with the location, you could sure implement an emergency script redirecting all calls to a different number.
Regards,
Riccardo
03-05-2008 07:06 AM
Thanks very much for the reply.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide