06-23-2012 03:13 AM - edited 03-14-2019 10:06 AM
HI Team.we need to configuring IP SLA in cisco 3925 router with c3900-universalk9-mz.SPA.151-4.M4.bin ios. For Monitoring purpose. Earlier we have used the rtr command for the same. Now we are going with new Cisco 3925 router. with the above mentioned IOS. Pls suggest whether we can configure the IP SLA in the router with Licence. Or We need to buy the licence for the ame.
---
Posted by WebUser Ramkumar Selvaraj from Cisco Support Community App
06-26-2012 10:52 PM
Hi
I think the command has been updated - rather than 'rtr responder' it's now 'ip sla responder'.
I don't believe you need any particular feature set.
Also, this is a 'Contact Center' forum - you would get more responses in other places.
Regards
Principal Engineer at Logicalis UK
Please rate helpful posts...
08-20-2012 12:10 PM
you need the "DATA" license. Otherwise you will install routes point to devices that can go down and you will never know it.
06-28-2013 06:37 PM
Hi,
The IP SLA Configuration is different now. I've solved this issue through changing the configuration:
Please see link for sample:
Regards,
Rommel
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide