CVP Standalone Transfer Element Error

[laweaver]

Getting error below when using transfer element in cvp standalone.  have tried hard coding known good extention (instead of variable) for the transfer destination, same result.

%CVP_8_0_VXML-3-VXML_CALL_ERROR:  DatafeedMgr.handleErrorAction(): Call 88970753536811E087BB8AC2E835B2F3 in application PS131_Main's element 'Transfer_01' has encountered vxmlError, error=In element Transfer_01, encountered a phone error. The element may try to transfer to a bad destination [id:6003]
95864: 172.17.0.50: Mar 21 2011 21:10:31.125 -0600:

[miburt]

This seems to be indicating a problem with the number your trying to be transfered to. I know you stated that the number is good,  so a TAC case is probably a warranted to further investigate if this is not resolved yet, with CVP and Activity logs from this specific application.

[geoff]

I don't know how you are doing this, but if I want to reach an IP phone, I just pass back a label as the phone number, catch it in a dial peer and apply a translation rule then send it to Call Manager.

What sort of phone are you trying to reach?

I recommend doing it as a bridged transfer first so you can catch the error. Later change it to non-bridged

Regards,

Geoff