05-12-2014 10:51 AM - edited 03-15-2019 05:59 AM
We are still in ver 7 CCX and our support center has this feature turned off. Supers want the agents to be able to take calls as soon as they end a call. However, one team is allowed to have this time after their calls and the super has asked me to enable it just for them.
Is it possible to enable Wrap Up/Work for specified agents, leaving the rest of the agents with this functionality disabled?
Thank you in advance!
Solved! Go to Solution.
05-12-2014 11:17 AM
You need to create a New Work Flow Group for them in Desktop Administrator and assign the Workflow to the Agents Accordingly; use this link:
05-12-2014 12:36 PM
Actually you use both in Tandem..you have to create WorkFlow Group in Desktop Admin and then Apply Agents to those in "teamadmin"
05-12-2014 11:17 AM
You need to create a New Work Flow Group for them in Desktop Administrator and assign the Workflow to the Agents Accordingly; use this link:
05-12-2014 11:17 AM
Hi Sam, thanks for the response. This is my first time creating a workflow, and assigning these specific agents only. Is there a step by step instruction outside of Cisco's white papers for agents only, not the enterprise?
Thank you
05-12-2014 11:43 AM
Is the Team that wants to go directly to Ready part of a Different CSQ? If so..using WorkFlow is not actually the easiest way to accomplish this task. The Best way would be to go to the CSQ level configuration and just set AutoWork to Disable...and WrapUp to Disable..only do this if that particular team is in a separate CSQ..otherwise I can help write a simple step by step procedure..beside the document in the link I don't know of anything that spells it out any better than that guide.
05-12-2014 11:43 AM
There are 8 agents and they are part 5 different CSQs
05-12-2014 11:48 AM
In CSQs where Agents Need to Go Straight to Ready After Calls Disable Wrapup and AutoWork. In the CSQs where Agents Need to Work..keep the WrapUp where it is..
Does that Help?
05-12-2014 11:56 AM
05-12-2014 11:59 AM
Use the following URL:
http://<CCX-server>:6293/teamadmin/main.cda
05-12-2014 12:11 PM
I'm in vers 7 CCX we have to use the local install Desktop Admin plugin.
05-12-2014 12:36 PM
Actually you use both in Tandem..you have to create WorkFlow Group in Desktop Admin and then Apply Agents to those in "teamadmin"
05-12-2014 12:41 PM
Wonderful. Our engineers do not have authentication for it. Most of this is new to me, coming from a strictly UCM background. I'm learning CCX on the fly. Everything I tend to need access too either hasn't been used or it doesn't work because our CCX is obsolete.
If I create the new Workflow and name it something like Wrap-Up_Team. Can I add agents any other way?
05-12-2014 12:46 PM
You or Your Engineers "should" have access to teamadmin via their Normal Administrator Credentials..let me know if this is not the case? To answer your question though, there might be a way to do this in the Database considering it is "exposed" because of MS SQL..but other than something like that..you need to get into teamadmin..
05-12-2014 01:33 PM
Hi Sam, perhaps I wasn't understanding your instruction. I apologize, I was able to update the CSQ's requested and assigned :15 second wrapup. I made the changes through CCX Administration>Subsystems>RmCm>Contact Service Queues.
Thank you for your help.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide