03-21-2019 11:32 AM
Hello Experts,
I am looking for an option to pass a value which is received on the SIP INVITE from our vendor to next hop which is a CUBE.Eventually this value (5 digits number) needs to be passed to ICM via CVP. Please find the attached picture for your reference. I need to pass the value mentioned for foneCR(Highlighted in yellow) value will be a random 5 digits number) . Any suggestions ?
Solved! Go to Solution.
03-24-2019 12:48 AM
No, your main issue now is passing the header value to the CVP. As I'm sure because this is not a recognized header ("foneCR") the CUBE is dropping this header from the INVITE that is being sent from the CUBE to CUCM/CVP.
What you actually need first is to follow those instructions for configuring a pass to a customized list of SIP headers:
And only then, you need to configure your CVP via OPS Console like in the link that is being shared with you already.
03-22-2019 06:15 AM
I'm not quite clear what you're asking, are you asking if UCCE/CVP supports getting information from a SIP header for instance? If so, the answer is yes, see attached for instance.
03-23-2019 01:01 AM
Hi bill.king1,
Thank you for your response. Yes that was one of my questions. I am also looking for an option which allows me to pass one of the sip header values I received on my incoming Invite to the next hop. In the given example I am receiving a header foneCR on my incoming invite and I need to pass this value in my outgoing Invite. Call flow is as given below
Media Proxy Server -->CUBE1-->CUBE2-->CUSP-->CVP
I am receiving this header in the incoming invite from Media Proxy Server to CUBE1 and I need to pass it to CVP. Please let me know if you are still not clear about the requirement.
03-24-2019 12:48 AM
No, your main issue now is passing the header value to the CVP. As I'm sure because this is not a recognized header ("foneCR") the CUBE is dropping this header from the INVITE that is being sent from the CUBE to CUCM/CVP.
What you actually need first is to follow those instructions for configuring a pass to a customized list of SIP headers:
And only then, you need to configure your CVP via OPS Console like in the link that is being shared with you already.
03-26-2019 02:26 AM
Hi Slavik,
Thank you so much , I am able pass the optional header to CVP now.
Regards,
Shibin
03-22-2019 06:19 AM
03-23-2019 01:58 AM
Hi Prashanth,
Thank you for sharing the link, I will check this out.
Regards,
Shibi
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide