Hi All - Is it possible to change PCCE Deployment Type from Lab only Mode to Production Mode Packaged CCE: CCE-PAC-M1.
Currently we have single UCS server which will be deployed as PCCE Lab only Mode once we have another UCS which will be deployed as side B during that time is it possible to change Deployment Type from Lab only Mode to CCE-PAC-M1.
If its possible then how do we need to design the Side A setup to have PCCE Lab only which then can be switched to CCE-PAC-M1 once we have Side B in place.
As per Lab only mode CVP Ops should be co-located with CVP Call Server as per below http://docwiki.cisco.com/wiki/Packaged_CCE_Lab_Only_Deployment_Information
1 Cisco Unified CVP Ops Console Server, co-located with a Cisco Unified CVP Call Server, Cisco Unified CVP Media Server, and Cisco Unified CVP VXML Server.
In that case once we have Side B in place will system allow to switch CCE-PAC-M1 since as per CCE-PAC-M1 we should have dedicated OPS + 4 CVP Servers for PCCE CCE-PAC-M1 Validation.
Is it really possible / recommended, Need your suggestion for the same.
SIVANESAN R
