
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-12-2014 03:38 PM - edited 03-15-2019 06:04 AM
Hi,
Please explain working of CVP,PG and CUCM as Routing client in Cisco UCCE Environment.
Regards-
PK
Solved! Go to Solution.
- Labels:
-
Other Contact Center
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-12-2014 09:49 PM
All these information is available in UCCE SRND, as well as admin guides. you must start exploring them.
let me also try to explain in brief:
PG connects to peripheral like CVP, CUCM etc. the pim process is the one which actually makes a connection to external peripheral.
a single PG can connect to multiple peripheral using multiple pims(a PG can have multiple PIM's), and each pim is configured in ICM as a separate peripheral, and for the same pim you will also have a separate routing client.
e.g A VRU PG has a 4 pim connecting to 4 CVPs, then basically you will have 4 routing clients. each as a separate peripheral.
regards
Chintan
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
11-12-2014 09:49 PM
All these information is available in UCCE SRND, as well as admin guides. you must start exploring them.
let me also try to explain in brief:
PG connects to peripheral like CVP, CUCM etc. the pim process is the one which actually makes a connection to external peripheral.
a single PG can connect to multiple peripheral using multiple pims(a PG can have multiple PIM's), and each pim is configured in ICM as a separate peripheral, and for the same pim you will also have a separate routing client.
e.g A VRU PG has a 4 pim connecting to 4 CVPs, then basically you will have 4 routing clients. each as a separate peripheral.
regards
Chintan
