cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
548
Views
5
Helpful
1
Replies

UCCE 10.5 Vulnerability VMSA-2018-0004

mkhriesa
Level 1
Level 1

Dear ,

we have a vulnerability on Vcenter  , VMSA-2018-0004 , the solution to update from existing version 5.5  to 5.5 U3h

can we do it? is there any affect for our UCCE 10.5 system?

1 Accepted Solution

Accepted Solutions

Ratheesh Kumar
VIP Alumni
VIP Alumni
Hi there
As per Cisco UCCE visualization, they mention only the versions that supports Not the patch. As long as the base version is compatible you should be good to go with.
https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-unified-contact-center-enterprise.html#10.5
You can also open up a TAC prior to applying the patch and explain about this and schedule their availably during the maintenance window time.


Hope this Helps
Cheers
Rath!

***Please rate helpful posts***




View solution in original post

1 Reply 1

Ratheesh Kumar
VIP Alumni
VIP Alumni
Hi there
As per Cisco UCCE visualization, they mention only the versions that supports Not the patch. As long as the base version is compatible you should be good to go with.
https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-unified-contact-center-enterprise.html#10.5
You can also open up a TAC prior to applying the patch and explain about this and schedule their availably during the maintenance window time.


Hope this Helps
Cheers
Rath!

***Please rate helpful posts***