I have 2 questions regarding UCCX Historical Reporting 8.x.
1) In the Traffic Analysis report, there is a field for Peak Hour. The Peak busy hour for my customer's contact center is the morning and is shown in other reports as being in the morning, but the Traffic Analysis report has it in the afternoon. How is this field calculated?
2) Is there a report that can give me an average number of calls per hour per agent and a summary?
1) That report shows the hour period that had the most incoming calls to the whole system. That means all CSQs... what report are you comparing it to? That report may be for a single CSQ that is busy in the afternoon, where the total for the system is higher in the morning.
2) No, there is not. You would need a custom report to produce this if it is important.
We only have one CSQ for the system & the main number comes directly into that CSQ. I am comparing the report to the Contact Service Queue Activity Report (by Interval) as well as my customer knows her contact center's busy times and they are not the time stated on that report. The busy times that are verified in the CSQ Activity Report are the morning hours. The Traffic Analysis always has a late afternoon hour as peak.
Our beginner online classes are designed to help IT Admins plan, deploy, and manage their Webex Control Hub environment. Start off by learning what critical elements are needed to deploy Control Hub or move into Webex features that can be used to better ...
I need to modify the SIP header. When I call to the PSTN, the header SIP show From email@example.com (Gateway - Private IP 172.24.10.6) and i need firstname.lastname@example.org (Gateway - Public IP 18.104.22.168). How can I change in theGateway the ...
Need some help with a gadget development. Have a gadget built however it triggers when a call comes to an agent and immediately after when the agent goes into "RESERVED" state. I need to pop a window that is working however the pop happens bef...