cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1581
Views
2
Helpful
2
Replies

Unable to select config or image in PnP project

aevans
Level 1
Level 1

Hi,

I'm hoping someone can help. I am testing out PnP when I create a project I am unable to select the configuration file or image. I have these uploaded in my repository. When I select Image it just says "showing 0 of 0" with a spinning circle. see attached)

I am able to select the PID

I can type in the file name but I'm not sure this is correct as it fails on boot up. Has anybody else come across this issue?pnp.JPG

1 Accepted Solution

Accepted Solutions

aevans
Level 1
Level 1

Fixed it. The reason was because I supplied an external TFTP server. I created a new Project without this information and I now have access to configuration and images.

View solution in original post

2 Replies 2

aevans
Level 1
Level 1

Fixed it. The reason was because I supplied an external TFTP server. I created a new Project without this information and I now have access to configuration and images.

thanks for the update.