Hi,
I am attempting to ping from one 5k to another via a point to point link.
before
system qos
service-policy type queuing input fcoe-default-in-policy
service-policy type queuing output fcoe-default-out-policy
service-policy type qos input fcoe-default-in-policy
service-policy type network-qos fcoe+jumbo-policy
after
system qos
service-policy type queuing input fcoe-default-in-policy
service-policy type queuing output fcoe-default-out-policy
service-policy type qos input fcoe-default-in-policy
service-policy type network-qos jumbo
Configuration applied
policy-map type network-qos jumbo
class type network-qos class-default
mtu 9216
system qos
service-policy type network-qos jumbo
I have enabled jumbo frames as per the documentation online and seem the error arise.
Warning: fcoe feature enabled but class-fcoe is not included in policy
I am still unable to ping across the link.. Does anyone what this error means and if further configuration is need to resolve it?
I am also unable to still ping jumbo via the point to point
N5548-SW-01# ping 10.10.202.250 packet-size 9000 source 10.10.202.253 df-bit
PING 10.10.202.250 (10.10.202.250) from 10.10.202.253: 9000 data bytes
Request 0 timed out
Request 1 timed out
Request 2 timed out
Request 3 timed out
Request 4 timed out