Hi, We are attempting to meet the requirements that Dell stipulates in their Nexus document below. The problem is that some of these commands Dell stipulates are not functional on the 3172TQ. https://www.dell.com/support/kbdoc/en-uk/000126653/powerst...
Forum Posts
Hi, can a Nexus FEX 2K uplink port be used as a normal access port? or only can be used as uplink only, can anyone please advise, thanks in advance!
Resolved! Assistance is the Nexus 9K differences
Good day, Can somebody please advise what is the difference between N9K-C93108TC-FX3P and N9K-C93108TC-FX? Thanks!
Hello DearsI want to configure nexus switch 9318 to send log to log server for any changes or notification in the systemi did the following but seems it's not working :logging server 10.0.0.2 7 use-vrf mang facility sysloglogging level ethpm 7loggin...
Dear friends,I have a strange issue to share regarding my VxLAN fabric. I'm using two N9K-C9364C for Spines and 3164Q / 9396PX for leafs. They are only doing simple VxLAN bridging of hosts' traffic, so no customer routing etc. /no customer Layer 3 on...
Trying to migrate nexus 5k to nexus 9k , while migrating i have some queries on configuration part. Existing command which is working in N5k- spanning-tree vlan 1-3967,4048-4093 priority 0 while coming to N9k not able to execute vlan 4048-4093 comman...
Good Day, I have leaf switches (in ACI Mode), need to convert into data brooker mode, any help? Regards,
Hi, VXLAN connection is like below, and vni/NVE/multicast and bridge-domain can work well user-pc1 ------VTEP1 ------VTEP3-----VTEP2------user-pc2Now pc1 and pc2 has the same subnet and can ping each other. If pc1 and pc2 has different subnet, what ...
DearsI am planning to make backup vPC path for current vPC path , in aonther mean we have vpc 1 between Nexus 1 and Nexus 2 , I planned to make vpc 2 to be redendet for vpc 1 so is that double ? take in mind the switches are 9318. Bests
Hi all,I am seeing this error, any information on what the cause is and what needs to be looked at?
Hi all, need your guidance.., my CCIE Routing and Switching Lab exam is expiring in mid Feb 2023. What's the best way to get recertified within this time frame? Your guidance is appreciated in advance. Thank you, Jit
I see LCM_EV_PFM_SEEPROM_READ_ERROR in the events and MOD_STATUS_ERRDOWN in the system log. 2022 Dec 1 17:04:19 spk-ptt-nexus-c9508-1 %PLATFORM-2-PS_CAPACITY_CHANGE: Power supply PS8 changed its capacity. possibly due to On/Off or power cable remov...
Hi there,I have a pair of Cisco Nexus 5672 switches and I wanted to upgrade them yesterday from 7.1.0.N1.1b to 7.1.5.N1.1b.One switch was working without any issues, but on the other, it wasn't working.This switch took already extremely long to boot ...
Hi,Is it possible to leverage EVPN Multisite where a vPC Border Gateway is connected to a "Classic" L2-segment only (i.e. no site-internal VTEPs)? I configured this and actually see Multisite in a non-operational state because of Fabric isolation (th...
Resolved! Nexus 9K vPC dropped traffic
I'm having an interesting issue at one of my customers. Scenario: customer is trying to reach an internal web server on its external public IP. Client IP SNAT is performed on an F5 (which also hosts the public IP of the web server), with the next hop...
