secure password so fast to disable on first boot of nexus 9000v

[TsadikuBahiru78025]

I was installing the image cisco nexus 9000v on eve-ng community edition but during it's first boot it is so fast that I was  not able to disable the secure password question and enter a new password. So, I am not able to enter into the switch and use it. Any help is appriciated

[balaji.bandi]

wipe again and start, do not use any keyboard strokes until it clear, because of enter key, it take defaults.

[TsadikuBahiru78025]

Thanks for your help but it is still the same here is the output

 

[balaji.bandi]

if you using secure password ( then it should be combination)

personally for Lab, i select  N

[sp2720401]

You also have the third option "skip" when during POAP. Skip POAP and you get right to a prompt and can login with admin and no password. The only problem there is that you have to set a password before you can save the configuration to startup config and you will also have to set the "boot nxos" statement.

Use that

[TsadikuBahiru78025 · Accepted solution]

Thank you in deed!

This has solved the problem