08-25-2022 05:31 AM
Dear Community Members.,
I need heads-up on setting up cisco UCS6248UP 10gb fibre switch to interconnect with Routers , Switches and servers in the Data Center
The device is actually refurbished .
Regards
08-25-2022 09:50 AM
Hi @2D-Technology Services
Based on your very generic question, I believe you are looking for configuration guides related to UCSM. Since the configuration it's not that straight forward and there are multiple aspects of the config, I would recommend to read these:
- start with this: https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-b-series-blade-servers/data_sheet_c78-520522.html
- continue with the config guide: https://www.cisco.com/c/en/us/support/servers-unified-computing/ucs-manager/products-installation-and-configuration-guides-list.html
Take care
Sergiu
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community