SFP-H10GB-CU1M

[Bob Greer]

Hi there,

Thanks for reading.

Might be the wrong forum... we're connecting Catalyst 3850s to servers with SFP-H10GB-CU1M (2 ports each on two 3850s).  On both switches, one port is fine, the other is showing the hardware as "Te2/0/13" "1000BaseSX SFP" PID: GLC-SX-MMD"

Have you seen this before?  I tried speed nonegotiate but no difference.

Thanks again!

Bob  

[nazimkha]

which version are you using ?

You should be on higher than IOS XE 3.7.2 or IOS 16.2.1