Stuck at bios Nexus 3000

[whitegrape]

HI Guys,

I have a switch Nexus 3064PQ stuck at bios. 

*
(c) Copyright 2011, Cisco Systems.
N3000 BIOS v.1.7.0, Mon 10/14M

Unable to boot past this.

Anyone has already idea what's wrong with this?

Thanks in advance!

[Sergiu.Daniluk]

What actions did you performed before the problem appeared (upgrade, config etc)?

Sergiu

[whitegrape]

Hello,

It is a refurbished set. Im not sure what did the previous supplier has done to it too.

Thanks!

[Sergiu.Daniluk]

Hi @whitegrape 

If the device is not booting, then probably the device is bricked. There are some unsupported upgrades which can brick your switch (example: CSCva97678). You should return the switch and ask for a replacement.

Stay safe,

Sergiu

[whitegrape]

Hi Sergiu,

Thanks for your advise! Seems like the device is bricked.

I will look for other way! 

Thanks for your help!

Regards,
Roy

[balaji.bandi]

Connect the console post, power off and power on the device post complete output, may be you need to do recovery.

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/troubleshooting/guide/b_Cisco_Nexus_9000_Series_NX-OS_Troubleshooting_Guide/b_Cisco_Standalone_Series_NX-OS_Troubleshooting_Guide_chapter_01.html

[whitegrape]

Hello,

Thanks! actually I connect to the console port and it couldn't get past the bios. Im unable to load to the loader.

Im thinking any solution to find out the bios problem.

[balaji.bandi]

Raise an TAC case for RMA. If you have smartnet contract.

[whitegrape]

Hi BB,

Thanks for your advise! 

I will try to solve on my side.

Regards,

Roy