Hello Friends,
We have an issue with Sync-status of our Nexus 5596 series switches. Please find the below status. I tried to resync-database, removed the peer destination and tried to import the configuration into the conf sync mode. But yet the sync-status wouldn't become "merged" and also the verification and commit would fail. I tried doing it from primary and also from secondary nodes. Do I have to remove the configuration from config Terminal mode and manually execute the configuration in Conf sync mode or is this a bug in IOS. Please assist me to fix the issue. Let me know if you need any more information. Thanks and appreciate your help!
switch-profile : ABC
----------------------------------------------------------
Start-time: 554543 usecs after Thu Jan 16 11:23:57 2020
End-time: 943561 usecs after Thu Jan 16 11:24:02 2020
Profile-Revision: 9
Session-type: Initial-Exchange
Session-subtype: Init-Exchange-All
Peer-triggered: No
Profile-status: Merge Failed
Local information:
----------------
Status: Verify Success
Error(s):
Peer information:
----------------
IP-address: x.x.x.x
Sync-status: Not yet merged
Merge Flags: pending_merge:1 rcv_merge:1 pending_validate:0
Status: Verify Failure
Error(s):
Validation Failed: Config validation failed as found changes on both sides. rcvd_rev: 0, expected_rev: 0
interface Ethernet1/45
description *** Uplink FW-1 ***
interface Ethernet1/45
switchport mode trunk
interface Ethernet1/45
channel-group 20 mode active
interface Ethernet1/46
description *** Uplink FW2 ***
interface Ethernet1/46
switchport mode trunk
interface Ethernet1/46
channel-group 21 mode active
interface Ethernet153/1/7
description **ABC**
+++++++++++++++++++++++++++++++++++++++++++
sh version
Software
BIOS: version 3.6.0
loader: version N/A
kickstart: version 7.0(8)N1(1)
system: version 7.0(8)N1(1)
Power Sequencer Firmware:
Module 1: version v7.0
Module 2: version v1.0
Module 4: version v1.0
Microcontroller Firmware: version v1.0.0.2
SFP uC: Module 1: v1.0.0.0
QSFP uC: Module not detected
BIOS compile time: 05/09/2012
kickstart image file is: bootflash:///n5000-uk9-kickstart.7.0.8.N1.1.bin
kickstart compile time: 2/20/2016 21:00:00 [02/21/2016 07:32:37]
system image file is: bootflash:///n5000-uk9.7.0.8.N1.1.bin
system compile time: 2/20/2016 21:00:00 [02/21/2016 10:04:42]
