cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4225
Views
0
Helpful
4
Replies

outgoing mail domain issue

wajid dabir
Level 1
Level 1

I am getting a below error for one domain.users are sending the mail to this domain are getting softbounce with the error Reason:4.1.0 - unknown address error (451 Temporary local problem- please try later}

find error in detail in attachment.

want to clear this error on urgent basis as mails are not receiving to client.kindlyhelp someone on urgent basis.

I check the host status , it is showing up.also check the grep for domain IP, not showing any error, still the mail are soft bouncing.

4 Replies 4

Martin Eppler
Cisco Employee
Cisco Employee

Hello Wajid,

I'd recommend to get in touch with the Postmaster of the destination mail server in question, as the server seems to have an internal issue as per the provided SMTP response. As specified in the RFC5321, the appliance will retry the deliveries as per bounce profile configuration when a 4xx SMTP response code is being received on delivery connections. As the destination mail server is replying on SMTP commands, the hoststatus is seen as up. However, the destination mail server is temproary defering all deliveries due to an internal issue.

Best regards,

Martin

Thanks Martin for your valueable reply, it helps me a lot to face the customer.

Dear martin, can we check the mail queue of ironport, i mean total mails coming in queue for delivery.In tophosts  active receipent only shows the some domain detail, i want to check for complete mails in total.

Also is it possible to add the image or logo in disclaimer in ironport.

Regards,

Wajid Dabir

Hello Wajid,

 

HTML disclaimers are supported since AsyncOS 7.5 (see http://www.cisco.com/c/dam/en/us/td/docs/security/esa/esa7-5/ESA_7-5_Release_Notes.pdf). By this, it is possible to reference images in a disclaimer as long as the image in question is stored on an internet facing and reachable webserver.

 

The total number of active recipients can be found on GUI under Monitor -> System Status or on the CLI with the command 'status detail'.

 

Best regards,

Martin

Dear Sir,

I contact with the destination postmaster and replied the below logs for the issue.

 

I just want to verify on which end the problem is present.

 

2014-03-13 12:23:30 SMTP connection from (smtp.rblbank.com) [180.179.117.92]:63543 I=[119.18.57.70]:25 closed by QUIT
2014-03-13 12:24:04 H=(smtp.rblbank.com) [180.179.117.92]:21700 I=[119.18.57.70]:25 sender verify defer for <Sachindra.Singh@rblbank.com>: host lookup did not complete
2014-03-13 12:24:04 H=(smtp.rblbank.com) [180.179.117.92]:21700 I=[119.18.57.70]:25 F=<Sachindra.Singh@rblbank.com> temporarily rejected RCPT <wiremesh@haverstandard.com>: Could not complete sender verify
2014-03-13 12:24:09 SMTP connection from (smtp.rblbank.com) [180.179.117.92]:21700 I=[119.18.57.70]:25 closed by QUIT
2014-03-13 13:13:04 H=(smtp.rblbank.com) [180.179.117.92]:22235 I=[119.18.57.70]:25 sender verify defer for <Amit.Gorwara@rblbank.com>: host lookup did not complete
2014-03-13 13:13:04 H=(smtp.rblbank.com) [180.179.117.92]:22235 I=[119.18.57.70]:25 F=<Amit.Gorwara@rblbank.com> temporarily rejected RCPT <wiremesh@haverstandard.com>: Could not complete sender verify
2014-03-13 13:13:04 H=(smtp.rblbank.com) [180.179.117.92]:22235 I=[119.18.57.70]:25 sender verify defer for <Sachindra.Singh@rblbank.com>: host lookup did not complete
2014-03-13 13:13:04 H=(smtp.rblbank.com) [180.179.117.92]:22235 I=[119.18.57.70]:25 F=<Sachindra.Singh@rblbank.com> temporarily rejected RCPT <wiremesh@haverstandard.com>: Could not complete sender verify
2014-03-13 13:13:04 H=(smtp.rblbank.com) [180.179.117.92]:22235 I=[119.18.57.70]:25 F=<Sachindra.Singh@rblbank.com> temporarily rejected RCPT <leena@haverstandard.com>: Could not complete sender verify
2014-03-13 13:13:04 H=(smtp.rblbank.com) [180.179.117.92]:22235 I=[119.18.57.70]:25 sender verify defer for <Amit.Gorwara@rblbank.com>: host lookup did not complete

 

Regards,

Wajid