7832 Conference phone on CME?

[jaredkelsey]

Hello,

I was hoping to use a 7832 at a branch office, like my other non-cisco SIP phones and register to CME through "voice register pool", fast-track style.

I uploaded the zipped firmware files to my flash and setup tftp-server settings for them.

But its not registering.

Can anyone think of a way to get the 7832 to register to CME?

[R0g22 · Accepted solution]

7832 are not supported with CME, not even with fast track.

[Debello81]

That is interesting. I used fast track for ours with no issue until i upgraded to 12.3 CME and now that the phone is officially supported it no longer works.

!

!
voice register pool-type 7832-FT
phoneload-support
telnet-support
description 7832 Conference Room
reference-pooltype 8831
!

voice register global
load 7832-FT sip7832.12-0-1-8

!
voice register dn 29
number 529
allow watch
name Small Conference Room
shared-line max-calls 4
label Small Conference Room
!

!
voice register pool 29
busy-trigger-per-button 2
id mac 706B.B925.47A4
type 7832-FT
number 1 dn 29
presence call-list
dtmf-relay rtp-nte
username 529 password 529
codec g711ulaw
transfer-pattern blocked
transfer max-length 12
!

[R0g22]

If it worked for you, its great. Cisco won't have supported it if it wouldn't have worked and you would have wanted TAC support.
When you say it no longer works, what is not working ? Registration, calls etc ?

[Debello81]

They wouldn't register. I upgraded the code on the phones and they finally started working again.