Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,As subject says, is it possible to make a line group-hunt list with external numbers (e.g. mobile phones)What I had in mind is to make CTI route point/port and to do CFA to mobile number. But:-on 6.x I couldn't even add CTI route point / port to l...
Requirement is to port the DID of ISDN to existing ITSP SIP trunk and route internally. This specific range requires to be called from certain numbers. (mean the trunk has to have specific inbound CSS vs other DID members which will have regular inbo...
How to connect asterisk with cisco call manager via sip trunk ? Please tell me the configuration to be done on the router. I'm new here. Please help. Thank you in advance.
I am just deploying a BE4000 (ISR4321). 1. We make the https://be4000.cisco.com/deploy settings on Cloud > users > phones > extensions > T1 > ISP send digits .., bar bar bar 2. Generate the code on Cisco Smart Account 3. Connect the g0/0 port to Inte...
So i had incoming calls work before with a test number received from the provider. Today they changed the number on their end to what it's suppose to be and incoming calls are now failing with message 500 internal server error and cause 16. Why is t...
Hello, I have Gateway VG01 with 2 PRI from ISP 1 and ISP2. Both these PRI are currently member of Trunk-Group PSTN. This gateway is defined as H323 on CUCM side, so there is no control on ports. With current setup only 1 PRI trunk from ISP1 is in use...
How dialpeers work for h.323 or sip GW/trunk for incoming and outgoing calls . what is the call flow in terms of SIP and H.323 for an Incoming and outgoing calls. how dailpeers comes in to the Picture . as i know call manager will not come in to the ...
Hi Team We have publisher and three subscriber. Rout list is registered with third subscriber only. I restarted route list but no luck. Regards,
Hi, we used a virtual CUBE for the SIP Connection to our provider. The provider need the call in a format like this: 0049XXXX but we are using an E.164 Dial Plan on the CUCM - +49XXXX. The call works fine and inbound call are presenting right – the...
Is it possible to retrieve the participants numbers who joined on a conference, if it is doable, how can it be done
Does the "From" field have to contain both user and host part in order to make a successful call? For a particular intercom, when it call mobile the from field looks like this sip:sip@domain. Telco said since there is no number in user part, they do ...
Hi, I have to deploy Cisco 8865 SIP IP Phone with CME. Router Model is 2911 and I have upgraded it to IOS 15.6. Now I have CME version 11.5 on my router. Still I am unable have registration of 8865 in CME. Kindly let me know How I can get 8865 reg...
Can anyone point me in the direction for the COP file for V11.5(1)SU4 to resolve the Disk Utilization Denial of Service Vulnerability bug please as I am going round in circles!!! I can fine the Release 11.5(1)SU4 at https://software.cisco.com/downlo...
Hi, Trying to use my 8861 with Ovh account. Parameters from ovh:
Hi Guys, I'm encountering fxo reloading please see logs below Jun 7 11:32:42.390: %DSPRM-2-DSPALARM: Received alarm indication from dsp (3/1). Resetting the DSP.Jun 7 11:32:42.390: %DSPRM-3-DSPALARMINFO: 0024 0000 0080 0000 0200 0000 4453 5020 4865...
