8800 Series Phones > 12.7 Firmware Call Blocking Feature
Thanks ahead of time to whomever replies.
We are on CUCM 10.5 and soon will upgrade to 12.5.
Recently, our 8800 series phone have been upgrade to 12.7 firmware.
I see 12.7 has a cool feature making it super easy to block "Potential Fraud" calls.
Anyone know of a simple way to block potential fraud calls across an entire cluster?
Right now, our method of call blocking is a tedious process of tracing calls back to the source, building number translation rules on service routers etc. Sort of a pain. Would be nice if Cisco could boil that down to an easy input form on call manager.
Re: 8800 Series Phones > 12.7 Firmware Call Blocking Feature
No, the way you're doing it is the way it's available. Either translation-rules to block at the GW or translation patterns in CUCM, nothing as easy as just a list where you input numbers and that's it.
Maybe if you build a custom TCL or use external call control in CUCM it could be a list as you wish, but that would be a custom solution you'd need to develop.
The phone feature is on the phone itself, not on CUCM or the GW.
You can always submit a PER via your SE/AM for this to be considered.
Our beginner online classes are designed to help IT Admins plan, deploy, and manage their Webex Control Hub environment. Start off by learning what critical elements are needed to deploy Control Hub or move into Webex features that can be used to better ...
I need to modify the SIP header. When I call to the PSTN, the header SIP show From email@example.com (Gateway - Private IP 172.24.10.6) and i need firstname.lastname@example.org (Gateway - Public IP 126.96.36.199). How can I change in theGateway the ...
Need some help with a gadget development. Have a gadget built however it triggers when a call comes to an agent and immediately after when the agent goes into "RESERVED" state. I need to pop a window that is working however the pop happens bef...