8841 - Do Not Disturb

[marora1209]

Not knowing when the 8841 phone is in DND mode is causing issues for our users.

Is there a configuration option to have it display the DND state on the display as the older models did?

Thanks

[Rob Huffman]

Hi there,

DND display is available with the release of new firmware 11-0-1;

User Interface Enhancements Users can now see the Do Not Disturb(DND) icon displayed in the top line of the phone screen when DND is enabled. Users may also notice a larger displayed font size and an improved line label display. The administrator does not need to enable these improvements. These features are supported on the following phones: • Cisco IP Phone 8811 • Cisco IP Phone 8841 • Cisco IP Phone 8845 • Cisco IP Phone 8851 • Cisco IP Phone 8851NR • Cisco IP Phone 8861 • Cisco IP Phone 8865

From;

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8800-series/english/11-0-1/releasenotes/p881_b_cisco-ip-phone-8800-series.pdf

Cheers!

Rob

[marora1209]

Thanks All for your quick feedback

[Deepak Rawat]

Working as design for 88XX phone, check the user guide below

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8811_8841_8851_8861/10_5/english/userguide/P881_BK_C9A41445_00_cisco-ip-phone-8811-8841.pdf

Turn DND On and Off

Procedure

Step 1
Press DND to turn on DND.
Visual confirmation displays briefly.

Step 2
Press DND again to turn off DND.
Visual confirmation displays briefly.

Regards

Deepak

- Rate Helpful Posts -

[Jaime Valencia]

The only option would be to adjust your phone button template to have a DND button to show that, otherwise, you only get the brief notification, and that's WAD

[marora1209]

Thanks All for your quick feedback