cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
861
Views
0
Helpful
1
Replies

8841 VPN with ASA

Blacker025
Level 1
Level 1

Hello

Currently we are running 7965 VPN phones, connecting to ASA, authenticating via SSL.  It is working well.

However we need to move to the 88XX series phone since the 7965 has been retired.  We are targeting the 8841 at this time.

I have a 8841 in house that I have pushed the cert to and see  LSC installed on the PC.   However once moved to a DSL line, it will not register.

Do I have to build a separate cert for the new model phone?

Thanks in advance.

1 Accepted Solution

Accepted Solutions

Adarsh Chauhan
Level 3
Level 3

Hi,

You do not need separate cert for different models.

Apply the same vpn profile on the phone and that should take it.

When the phone is taken outside, is the phone attempting to kick in vpn?

You can check the status messages on the phone to get an insight.

You may also refer to PhonAnyConnect VPN Phone

Please rate and mark if helpful

Regards,

Adarsh Chauhan


Please rate and mark correct if helpful
Regards,
Adarsh Chauhan

View solution in original post

1 Reply 1

Adarsh Chauhan
Level 3
Level 3

Hi,

You do not need separate cert for different models.

Apply the same vpn profile on the phone and that should take it.

When the phone is taken outside, is the phone attempting to kick in vpn?

You can check the status messages on the phone to get an insight.

You may also refer to PhonAnyConnect VPN Phone

Please rate and mark if helpful

Regards,

Adarsh Chauhan


Please rate and mark correct if helpful
Regards,
Adarsh Chauhan