Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
2203
Views
5
Helpful
3
Replies

8865 CME registration problem

Go to solution
Grishazahid
Level 1
Level 1

‎06-27-2018 07:00 AM - edited ‎03-17-2019 01:06 PM

Hello community!

I have a problem in connecting 8865 IP Phone to CME (version 12.0 , Cisco 891 router)

Phone succesfully receives IP , an then contacting TFTP server in search of SEPAC7E8AB6C34D.cnf.xml.sgn

I made this file using samples for 7960 model(SEP<MAC>.cnf.xml), but registration unsuccesful

Can someone share proper config file for 8865 phone?

 

Router's config

Spoiler

 

Router#sh run
Building configuration...

Current configuration : 2522 bytes
!
! Last configuration change at 12:52:09 EEST Wed Jun 27 2018
!
version 15.7
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
clock timezone EET 2 0
clock summer-time EEST recurring
!
!
!
!         
!
!
!
!
!
!
!
!
!
!
!
!
!


!
!
ip dhcp pool POOL1
 network 192.168.0.0 255.255.255.0
 default-router 192.168.0.1 
 option 150 ip 192.168.0.2 
!
!         
!
ip cef
no ipv6 cef
!
!
!
!
!
multilink bundle-name authenticated
!
!
!
!
voice service voip
 allow-connections sip to sip
 sip
  registrar server expires max 1200 min 300
!
!
!
voice register global
 mode cme
 source-address 192.168.0.1 port 5060
 max-dn 5
 max-pool 5
 authenticate register
 authenticate realm cisco.com
 auto-register
 !
!
voice register dn  1
 number 1001
 allow watch
 name Phone1
 label 10011001
!
voice register pool  1
 busy-trigger-per-button 2
 id mac AC7E.8AB6.C34D
 type 8865
 number 1 dn 1
 username user1 password cisco
 codec g711ulaw
!
!
!         
license udi pid CISCO891-K9 sn FTX171383YK
!
!
username grisha privilege 15 password 0 hardpass
!
redundancy
!
!
!
!
!
! 
!
!
!
!
!
!
!
!
!
interface FastEthernet0
 no ip address
!
interface FastEthernet1
 no ip address
!
interface FastEthernet2
 no ip address
!
interface FastEthernet3
 no ip address
!
interface FastEthernet4
 no ip address
!
interface FastEthernet5
 no ip address
!
interface FastEthernet6
 no ip address
!
interface FastEthernet7
 no ip address
!
interface FastEthernet8
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface GigabitEthernet0
 ip address dhcp
 duplex auto
 speed auto
!
interface Vlan1
 ip address 192.168.0.1 255.255.255.0
!
interface Async1
 no ip address
 encapsulation slip
!
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:/CME-GUI-12.0
!         
!
!
ipv6 ioam timestamp
!
!
!
control-plane
!
!
mgcp behavior rsip-range tgcp-only
mgcp behavior comedia-role none
mgcp behavior comedia-check-media-src disable
mgcp behavior comedia-sdp-force disable
!
mgcp profile default
!
!
!
!
!
!
!
telephony-service
 time-format 24
 date-format dd-mm-yy
 max-conferences 0 gain -6
 web admin system name grishazahid password hardpass
 web admin customer name cusadmin password cisco
 dn-webedit 
 time-webedit 
 transfer-system full-consult
!
!
 vstack
!
line con 0
line 1
 speed 115200
line aux 0
line vty 0 4
 login local
 transport input telnet
!
ntp server 34.202.215.187
!
end       

Router#

 

 SEPAC7E8AB6C34D.cnf.xml.sgn

Spoiler
<device>
    <fullConfig>true</fullConfig>
    <deviceProtocol>SIP</deviceProtocol>
    <devicePool>
        <dateTimeSetting>
            <dateTemplate>D.M.Y</dateTemplate>
            <timeZone>Ekaterinburg Standard Time</timeZone>
            <ntps>
                <ntp>
                    <name>192.168.0.1</name>
                    <ntpMode>Unicast</ntpMode>
                </ntp>
            </ntps>
        </dateTimeSetting>
        <callManagerGroup>
            <tftpDefault>true</tftpDefault>
                <members>
                <member priority="0">
                <callManager>
                <name>192.168.0.1</name>
                <description>Station</description>
                <ports>
                  <ethernetPhonePort>2000</ethernetPhonePort>
                  <sipPort>5060</sipPort>
                  <securedSipPort>5061</securedSipPort>
                </ports>
                <processNodeName>192.168.0.1</processNodeName>
                </callManager>
                </member>
                </members>
             </callManagerGroup>
    </devicePool>
    <commonProfile>
        <phonePassword></phonePassword>
        <backgroundImageAccess>true</backgroundImageAccess>
        <callLogBlfEnabled>0</callLogBlfEnabled>
    </commonProfile>
    <vendorConfig>
        <disableSpeaker>false</disableSpeaker>
        <disableSpeakerAndHeadset>false</disableSpeakerAndHeadset>
        <pcPort>0</pcPort>
        <settingsAccess>1</settingsAccess>
        <garp>0</garp>
        <voiceVlanAccess>0</voiceVlanAccess>
        <videoCapability>0</videoCapability>
        <autoSelectLineEnable>0</autoSelectLineEnable>
        <daysDisplayNotActive>1,7</daysDisplayNotActive>
        <displayOnTime>10:30</displayOnTime>
        <displayOnDuration>06:05</displayOnDuration>
        <displayIdleTimeout>00:05</displayIdleTimeout>
        <webAccess>0</webAccess>
        <spanToPCPort>1</spanToPCPort>
        <loggingDisplay>1</loggingDisplay>
        <loadServer></loadServer>
    </vendorConfig>    
    <deviceSecurityMode>1</deviceSecurityMode>
    <idleTimeout>0</idleTimeout>
    <directoryURL></directoryURL> 
    <servicesURL>$SERVICESURL</servicesURL> 
    <idleURL></idleURL>
    <messagesURL></messagesURL>
    <proxyServerURL></proxyServerURL>
    <dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig>
    <dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices>
    <dscpForCm2Dvce>96</dscpForCm2Dvce>
    <transportLayerProtocol>2</transportLayerProtocol>
    <capfAuthMode>0</capfAuthMode>
    <capfList>
        <capf>
            <phonePort>3804</phonePort>
        </capf>
    </capfList>
    <certHash></certHash>
    <encrConfig>false</encrConfig>
    <sipProfile>
        <sipProxies>
            <backupProxy>192.168.0.1</backupProxy>
            <backupProxyPort>5060</backupProxyPort>
            <emergencyProxy>192.168.0.1</emergencyProxy>
            <emergencyProxyPort>5060</emergencyProxyPort>
            <outboundProxy>192.168.0.1</outboundProxy>
            <outboundProxyPort>5060</outboundProxyPort>
            <registerWithProxy>true</registerWithProxy>
        </sipProxies>
     <sipCallFeatures>
        <cnfJoinEnabled>true</cnfJoinEnabled>
        <callForwardURI>x--serviceuri-cfwdall</callForwardURI>
        <callPickupURI>x-cisco-serviceuri-pickup</callPickupURI>
        <callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI>
        <callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI>
        <meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI>
        <abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI>
        <rfc2543Hold>false</rfc2543Hold>
        <callHoldRingback>2</callHoldRingback>
        <localCfwdEnable>true</localCfwdEnable>
        <semiAttendedTransfer>true</semiAttendedTransfer>
        <anonymousCallBlock>2</anonymousCallBlock>
        <callerIdBlocking>2</callerIdBlocking>
        <dndControl>0</dndControl>
        <remoteCcEnable>true</remoteCcEnable>
     </sipCallFeatures> 
     <sipStack>
        <sipInviteRetx>6</sipInviteRetx>
        <sipRetx>10</sipRetx>
        <timerInviteExpires>180</timerInviteExpires>
        <timerRegisterExpires>3600</timerRegisterExpires>
        <timerRegisterDelta>5</timerRegisterDelta>
        <timerKeepAliveExpires>120</timerKeepAliveExpires>
        <timerSubscribeExpires>120</timerSubscribeExpires>
        <timerSubscribeDelta>5</timerSubscribeDelta>
        <timerT1>500</timerT1>
        <timerT2>4000</timerT2>
        <maxRedirects>70</maxRedirects>
        <remotePartyID>false</remotePartyID>
        <userInfo>None</userInfo>
     </sipStack>
     <autoAnswerTimer>1</autoAnswerTimer>
     <autoAnswerAltBehavior>false</autoAnswerAltBehavior>
     <autoAnswerOverride>true</autoAnswerOverride>
     <transferOnhookEnabled>false</transferOnhookEnabled>
     <enableVad>false</enableVad> 
        <preferredCodec>g711ulaw</preferredCodec>
       <dtmfAvtPayload>101</dtmfAvtPayload>
       <dtmfDbLevel>3</dtmfDbLevel>
       <dtmfOutofBand>avt</dtmfOutofBand>
        <alwaysUsePrimeLine>false</alwaysUsePrimeLine>
        <alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail>
        <kpml>3</kpml>
        <stutterMsgWaiting>1</stutterMsgWaiting>
        <callStats>true</callStats>
        <silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts>
        <disableLocalSpeedDialConfig>true</disableLocalSpeedDialConfig>
        <startMediaPort>10100</startMediaPort>
        <stopMediaPort>10300</stopMediaPort>
        <voipControlPort>5060</voipControlPort>
        <dscpForAudio>184</dscpForAudio>
        <ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy>
        <dialTemplate>dialplan.xml</dialTemplate> 
        <phoneLabel>Cisco</phoneLabel>
          <natReceivedProcessing>false</natReceivedProcessing>
          <natEnabled>false</natEnabled>
          <natAddress></natAddress>
        <sipLines>
          <line button="1">
            <featureID>9</featureID>
            <featureLabel>1001</featureLabel>
            <proxy>192.168.0.1</proxy>
            <port>5060</port>
            <name>1001</name>
            <displayName>1001</displayName>
            <autoAnswer>
              <autoAnswerEnabled>2</autoAnswerEnabled>
            </autoAnswer>
            <callWaiting>3</callWaiting>
            <authName>user1</authName>
            <authPassword>cisco</authPassword>
            <sharedLine>false</sharedLine>
            <messageWaitingLampPolicy>3</messageWaitingLampPolicy>
            <messagesNumber></messagesNumber>
            <ringSettingIdle>4</ringSettingIdle>
            <ringSettingActive>5</ringSettingActive>
            <contact>1001</contact>
            <forwardCallInfoDisplay>
              <callerName>true</callerName>
              <callerNumber>false</callerNumber>
              <redirectedNumber>false</redirectedNumber>
              <dialedNumber>true</dialedNumber>
            </forwardCallInfoDisplay>
          </line>
          <line button="2">
          <featureID></featureID>
          <featureLabel></featureLabel>
          <speedDialNumber></speedDialNumber>
          </line>
        </sipLines>
    </sipProfile>
</device>

 

Labels:
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
M02@rt37
VIP
VIP

‎06-27-2018 07:09 AM - edited ‎06-27-2018 07:13 AM

Hi @Grishazahid

 

The config file that your ip phone try to download is a signed file SEP----.cnf.xml.sgn extension instead of your SEP---.cnf.xml.

The sgn mean signed file (by an certification authority via capf server).

It's due to that the phone was already registered in secure cluster.

 

Then do a factory reset.

And don'f forget to do a create profile in the voice register global menu in order to generate your SEP---.cnf.xml config file.

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.

View solution in original post

3 Replies 3

Go to solution
M02@rt37
VIP
VIP

‎06-27-2018 07:09 AM - edited ‎06-27-2018 07:13 AM

Hi @Grishazahid

 

The config file that your ip phone try to download is a signed file SEP----.cnf.xml.sgn extension instead of your SEP---.cnf.xml.

The sgn mean signed file (by an certification authority via capf server).

It's due to that the phone was already registered in secure cluster.

 

Then do a factory reset.

And don'f forget to do a create profile in the voice register global menu in order to generate your SEP---.cnf.xml config file.

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.

Go to solution
Grishazahid
Level 1
Level 1
In response to M02@rt37

‎06-27-2018 07:55 AM

Thanks for reply

I reset the phone.

Then I found some manual https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/manual/cmeadm/cmefiles.html#ucme_t_genconfig-sip

and do the following

2.    configure terminal

3.    voice register global

4.    file text

5.    create profile

after this some files appeared:

Router#show voice register tftp-bind
tftp-server url system:/cme/sipphone/syncinfo.xml alias syncinfo.xml
tftp-server url system:/cme/sipphone/SIPDefault.cnf alias SIPDefault.cnf
tftp-server url system:/cme/sipphone/softkeyDefault_kpml.xml alias softkeyDefault_kpml.xml
tftp-server url system:/cme/sipphone/softkeyDefault.xml alias softkeyDefault.xml
tftp-server url system:/cme/sipphone/featurePolicyDefault.xml alias featurePolicyDefault.xml
tftp-server url system:/cme/sipphone/SEPAC7E8AB6C34D.cnf.xml alias SEPAC7E8AB6C34D.cnf.xml

i copied file SEPAC7E8AB6C34D.cnf.xml to my tftp server

AND THERE IS A SUCCESS!! :) Thanks!

 

*Jun 27 14:02:28.174: %SIPPHONE-6-REGISTER: VOICE REGISTER POOL-1 has registered. Name:SEPAC7E8AB6C34D  IP:192.168.0.9  DeviceType:Phone

0 Helpful

Go to solution
M02@rt37
VIP
VIP
In response to Grishazahid

‎06-27-2018 08:30 AM

Ok @Grishazahid

 

Happy for you.

Don't forget to add the ntp-server command on your voice register global menu. Re do a create profile and restart all the ip phone.

 

Finally, the file text command generate an ASCII text file version of the configuration profiles for Cisco Unified IP Phone 7905s and 7905Gs, Cisco Unified IP Phone 7912s and 7912Gs, Cisco ATA-186s, or Cisco ATA-188s.

 

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.
0 Helpful
Customers Also Viewed These Support Documents