I have a single 8945 that hangs any time the camera is activated. First symptom was the phone would hang on any internal call (G.722 audio was maintained during the call, but the phone had to be power cycled after the call). It has 9.4(2)SR2 installed, and I tried downgrading the firmware, which was no help. That's when I discovered that it only happens when the camera is activated. I disabled video on the phone in CM, and it works fine (no video, of course). When the phone is idle, if I try the self-view soft key, the phone freezes.
Anyone see this happen on an 8945 before? Curious if there is a fix, besides disabling video on the phone.
Tony
