06-30-2014 04:47 AM - edited 03-16-2019 11:15 PM
Hi all,
I installed the 8961 using sip on CME 10.0, and I have configured the feature-buttons on the template which includes call pickup.
these feature buttons can display on the screen. But when I use these buttons, I get the busy tone, that means these feature buttons don't work.
Otherwise all configuration under voice register template X - will not be displayed on the phone.
Are there any other setting steps for using these call features?
Also if I press cfwd all softkey after pressing the first digit I will get an busy tone. Anybody has an hint to solve the issue ?
Thanks
Stefan
06-30-2014 04:51 AM
sh run output:
2911Fabi#sh run
Building configuration...
Current configuration : 4594 bytes
!
! Last configuration change at 11:24:07 UTC Mon Jun 30 2014 by cisco
version 15.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname 2911Fabi
!
boot-start-marker
boot system flash c2900-universalk9-mz.SPA.153-3.M3.bin
boot-end-marker
!
aqm-register-fnf
!
enable secret 5 $1$y/9B$dyQFexGqpq3RQucFhEG2p.
enable password cisco
!
no aaa new-model
!
no ip routing
!
!
!
!
!
!
no ip cef
no ipv6 cef
multilink bundle-name authenticated
!
!
!
!
!
!
!
voice-card 0
!
!
voice rtp send-recv
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol pass-through g711alaw
modem passthrough nse codec g711alaw
sip
bind control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
registrar server expires max 120 min 60
!
voice class codec 1
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 3 g729br8
codec preference 4 g729r8
!
voice class custom-cptone leavetone
dualtone conference
frequency 500 2500
cadence 300 400 500
!
voice class custom-cptone jointone
dualtone conference
frequency 500 1200
cadence 300 200 400
!
!
voice register global
mode cme
source-address 10.137.240.127 port 5060
privacy-on-hold
max-dn 200
max-pool 42
call-forward system redirecting-expanded
call-feature-uri cfwdall http://10.137.240.127/cfwdall
phone-redirect-limit 20
tftp-path flash:
create profile sync 0185744153262714
overlap-signal
!
voice register dn 1
number 100
pickup-group 1
name Michal Mandak
huntstop
label Michal Mandak
!
voice register dn 2
number 6022
pickup-group 1
name Stefan 6022
huntstop
label STefan 6022
!
voice register dn 3
number 161
pickup-group 1
name Jan Jilma
label Jan Jilma
!
voice register template 1
dialplan 1
softkeys idle Newcall Redial Cfwdall Pickup
!
voice register dialplan 1
!
voice register pool 1
busy-trigger-per-button 1
id mac 5478.1AE0.E122
feature-button 1 PickUp
type 8961
number 1 dn 1
template 1
!
voice register pool 2
busy-trigger-per-button 2
id mac 203A.0783.A2A9
type 8945
number 1 dn 3
!
!
!
!
!
license udi pid CISCO2911/K9 sn FCZ16446090
hw-module pvdm 0/0
!
hw-module pvdm 0/1
!
!
!
username admin privilege 15 password 0 cisco
username c privilege 15 password 0 c
username cisco privilege 15 password 0 cisco
!
redundancy
!
!
!
!
!
!
interface Embedded-Service-Engine0/0
no ip address
no ip route-cache
shutdown
!
interface GigabitEthernet0/0
ip address 10.137.240.127 255.255.255.0
no ip route-cache
duplex auto
speed auto
no mop enabled
!
interface GigabitEthernet0/1
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
!
interface GigabitEthernet0/2
no ip address
no ip route-cache
shutdown
duplex auto
speed auto
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip route 0.0.0.0 0.0.0.0 10.137.240.254
!
ip sla responder
!
!
!
control-plane
!
!
!
!
!
!
!
mgcp behavior rsip-range tgcp-only
mgcp behavior comedia-role none
mgcp behavior comedia-check-media-src disable
mgcp behavior comedia-sdp-force disable
!
mgcp profile default
!
!
dial-peer voice 10 pots
preference 1
destination-pattern 0.
!
dial-peer voice 20 voip
preference 1
incoming called-number .
!
!
!
!
gatekeeper
shutdown
!
!
telephony-service
sdspfarm conference mute-on 11 mute-off 11
sdspfarm units 3
sdspfarm unregister force
sdspfarm tag 1 confdsp1
no auto-reg-ephone
max-ephones 42
max-dn 200
ip source-address 10.137.240.127 port 2000
timeouts interdigit 6
time-zone 23
time-format 24
date-format dd-mm-yy
max-conferences 3 gain -6
call-park system application
call-forward pattern .T
multicast moh 239.1.1.1 port 16384
web admin system name dk password adm4cmeDK
dn-webedit
time-webedit
transfer-system full-consult
transfer-pattern .T
secondary-dialtone 0
fac standard
create cnf-files version-stamp Jan 01 2002 00:00:00
!
!
ephone-dn 12
number 6012
!
!
ephone-dn 13
number 6013
!
!
ephone-dn 14
number 6014
!
!
ephone 12
mac-address 0014.6A87.7BF3
type 7960
button 1:12
!
!
!
ephone 13
mac-address 0024.C40C.9304
type 7942
button 1:13
!
!
!
ephone 14
mac-address 5478.1A6B.416A
type 6961
button 1:14
!
!
!
!
line con 0
login
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
password cisco
login local
transport input all
!
scheduler allocate 20000 1000
!
end
09-17-2014 10:58 AM
Hi @stefan-walter,
In the telephony-service configuration, type the following:
telephony-service
call-park system application
service directed-pickup gpickup
cnf-file location flash:
cnf-file perphone
no create cnf-files
create cnf-files
Also, you can remove the feature-button from the voice register pool 1 if you want.
Let me know if that help you. It worked for me.
Rgrds,
Martin, IT Specialist
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: